Maintenance Of Woodworking Planer

Ensure that the woodworking planer is used in a dry environment to avoid rain and moisture in the circuit.
The operator should keep at least 5 cm away from the machine tool to ensure safe operation and avoid personal accidents.
Before starting the machine, the ground wire should be connected, the tools and debris on the workbench should be cleaned, and the firmware should be checked to see if they are tightened. Lubricate regularly and check the flexibility of the reducer.
Replace the blade in time after it is worn, ensure that the root of the blade is not worn too much, maintain uniform weight, avoid excessive deviation force during high-speed rotation, and extend the life of the bearing.
If the speed of the blade shaft slows down or makes abnormal sounds during operation, turn off the power immediately, check the fault comprehensively, and do not force it by hand to prevent wear of the blade shaft and other parts.
Clean the workbench after work and make sure that the main power is turned off before leaving the post.